Smart Active Harmonics Filters & SVG
BHFXX0TS is a series of an electronics based smart device that operates as an online active harmonics filter, reactive power consumption and Load balancing of the power network, it connects in parallel with “harmonics” loads to conduct a real time filtering & compensation in order to improve the power network quality, stability and safety.
| Electrical Parameters | ||||||
| Device Type | Rack Type | Wall Mounted Type | Full Cabinet Type | |||
| Device Name | BHFXX0RS | BHFXX0WS | BHFXX0CS | |||
| Available capacity | 50A,100A & 150A | 50A,100A & 150A | 50A up to 600A | |||
| Harmonics order | 2nd ~50th order | |||||
| THD | ≤ 5% | |||||
| Power Factor | ≥ 0.96 | |||||
| Harmonics compensation efficiency | ≥ 97% | |||||
| Full response time | 5~10 ms based on the Model | |||||
|
Compensation mode |
↗ Harmonics Compensation.
↗ Three Phase unbalance compensation. ↗ Capacitive & Inductive reactive power compensation |
|||||
| Wiring Pattern | Three Phase Three wire Three Phase Four Wires |
|||||
| Switching Frequency | 20khz | |||||
| Power Grid Voltage | 350~750 Volt | |||||
| Network frequency | 50~60 Hz | |||||
| Protection Mode | ||||||
| Over-voltage protection | Yes | Yes | Yes | |||
| Under-voltage protection | Yes | Yes | Yes | |||
| Short-circuit protection | Yes | Yes | Yes | |||
| Inverter bridge inverse protection. | Yes | Yes | Yes | |||
| Over Temperature Protection | Yes | Yes | Yes | |||
| Environmental parameters | ||||||
| Operating Humidity | >85 RH | |||||
| Storage Humidity | Up to 9% | |||||
| Operating temperature | -10℃ ~ +45℃ | |||||
| Storage Temperature | -15°C ~ +55°C | |||||
| Transport Temperature | -15°C ~ +65°C | |||||
| Noise | ≤ 65 dB | |||||
| Device Parameters | ||||||
| Protection type | IP20 | |||||
| Mode of communication | TCP/IP & ModBus | |||||
| Cooling Mode | Forces air cooling | |||||
| Touch Screen | Yes | Yes | Yes | |||
| Available Colors | White – light Gray & Black | |||||
