iBKSW-BEE-XYZZ iBeeSwitch

Description

BeeControls’ iBeeSwitch is a wall-mounting room controller device with integrated temperature and humidity sensor.

iBeeSwitch allows to control heating and cooling operating modes with 2-points, Continuous and PWM thermostat functions. Each push buttons equipped with an RGB LED to show feedbacks or visualization and LCD models equipped with VA-Display technology which provides low energy cost and good view angle. Moreover, there is a blue navigation LED for orientation nightlight.

The device provides adjustable LCD backlight and LEDs intensity for user comfort. Product range has 9 different models with LCD and without LCD. All models can be programmable with same ETS database which provides efficient commissioning.

The device has 2 different parts which are BCU and Application Board. Downloaded firmware carried on Application part, BCU part only carries KNX communication and power generation.

Technical Parameters

Electrical Parameters
Device Name	IBKSWBEE-XYZZ
Buttons Number	1,2,3,4,5,6,7,8,9 &10
Power Supply	KNX BUS Voltage
Current consumption	iBKSW-B08-1YZZ: 18mA iBKSW-B01-0YZZ: 10mA
LED Indicators	1 x Blue Navigation LED 1 x Red Programming LED
Environmental parameters
Operating Humidity	>90 RH
Storage Humidity	Up to 90%
Operating temperature	-10℃ ~ +70℃
Storage Temperature	-15°C ~ +90°C
Transport Temperature	-15°C ~ +100°C
Sensor	Temperature Sensor (±0.2°C sens.) Humidity Sensor (±2 %RH C sens.)
Device Parameters
Protection type	IP20
Mode of communication	S-Mode
Mounting	(35m) Din-Rail
Flammability	Non-Flammable Product
Dimensions (W x H x D) mm	90 X 90 X 12
KNX Bus Connector	0.6 ~0.8 Ø, solid
Output connectors	Screw terminal, 2.5 mm2 stranded ~ 4 mm2 Solid
Tightening torque	Maximum 0.5 Nm
Available colors	White, Champagne, Metallic, Black & Light Gray
Warranty Period	18 months